| User manual | User manual Ontech GSM 9009 |
Dokument
| Product sheet Ontech IR 9016 | |
| List of compatible air heat pumps | List of compatible air heat pumps |
| Quickstart Guide för Ontech GSM 9040 | Quickstart Guide Ontech GSM 9040 (Ontech Control) Quickstart Guide Ontech GSM 9040 (SMS) |
- Ontech IR 9016 connects to Ontech GSM 9040.
- Air heat pumps are controlled via Ontech Control or SMS or Android app wherever you are.
- Set temperature, mode and fan.
- Fits the major brands of air heat pumps on the market. A detailed list can be found here.
- The last software is available for download on the product page for Ontech GSM 9040.
- Updating is easy by connecting the supplied USB cable to a Windows computer.
Specifications
| GSM | Dual Band 900/1800 MHz, antenna contact type:SMA |
| SIM card | Mini-SIM. Comaptible with all operators with GSM (2G) networks |
| Temperature range | – 40 to + 55 degrees Celsius. The backup battery charges between +5 and +35 degrees C and can power the device between -5 and +40 degrees C. |
| Power consumtion | Nominal <0,5W, maximum 4 W. |
| Voltage | Is powered with 12-24 VDC. Power adapter is included |
| Backup battery | Built in backup battery 4,2 V Litium Polymer, 1100 mAh |
| Relay output | Potential free, max230V/10A |
| Alarm inputs (digital inputs) | 2 inputs 3-30 VDC can be set to Normally Open or Normally Closed |
| Internal temperature sensor | +/- 2 degrees at 25 degrees C and 230V output not activated |
| Input for external temperature sensor | Extern Tempsensor can be connected |
| Mini-USB contact (on circuit board) | For updating the firmware. Cable is included. |
| Short range radio | 2,4 GHz. Output power 1 mW |
| Cabinet | Cabinet sealing according to IP65 |
| Weight | 250 gr |
| Size | 140*75*40 mm |
| Approvals | Fullfills all EU requirements and is CE marked. |
- The device communicates with the main unit with a short-range radio frequency of 2.4 GHz. Up to 7 Ontech GSM Relay can be connected and controlled individually to each main unit.
- The unit has a 230V outlet that can be switched on and off by any of the main devices such as elements, pumps, etc.. The power supply can be delayed, from 1 second to 99 hours.
- The unit has a built-in temperature sensor. An external temperature sensor can be connected. This is an optional accessory and is not included. Upon request, the unit reports the temperature.
- The unit can be set to alert if the temperature exceeds or falls below a preset temperature.
- The unit can be used as a thermostat if one element is connected to the 230 V socket.
- The device has two wired alarm inputs. These can be set to end up (Normally Open, NO) or Breaking Function (Normally Closed, NC). Various types of alarms can be connected to these, such as fire alarms, motion detectors, level detectors, etc.
- Easy to install. Put the device into a wall outlet and it automatically contacts the main unit and registers in the Ontech system.
- The range is approximately 30 meters in the free field. This is usually enough for a normal sized villa. The devices also function as “repeaters”, ie they forward the radio signal to the main unit from devices further away. This increases the range of the system.
English
Svenska